Settima Screw pumps

The company Settima Meccanica has been producing screw pumps since 1978 and has become one of the leading European manufacturers. It is an independent, medium-sized company that is run in the second generation. An extensive and flexible range of screw pumps is produced. Settima is DIN / ISO 9001 certified and has ATEX certification for the SMT16B types. The SMT16B industrial pump is based in many ways on the mass production of the elevator pump and is a quiet and economical alternative.

The main applications are: power hydraulics, gear lubrication, cooling systems, test bench construction, oil burners, shipbuilding.

SMT configurator

At the top left (on the smartphone below) you can see the currently selected pump type. Below are the links to the individual pages that guide you step by step through the selection of your pump. If you already know which pump you need, you can configure it very quickly using the other menu items.

Settima-Code

Der Settima-Code für die aktuelle Auslegung lautet: T826LA14B5

Sie finden den Settima-Code (P/N) auf dem Aufkleber der Pumpe. Haben Sie einen Code und möchten unsere Typenbezeichnung ermitteln? Geben Sie hier den Code ein. Sollte keine Übereinstimmung gefunden werden, wenden Sie sich bitte an unser Team.

Selection of the pressure level

SMT 16B	The cost-effective pump for almost all applications with pressures up to 40 bar, delivery rates 4 to 3200 liters / minute.

SMT	For operating pressures up to 80 bar, delivery volumes up to 1220 liters / minute.

SMT..SN	The ideal pump for high viscosities and air proportions, for pressures up to 50 bar, for example: gear oil

SMT 8B	An inexpensive alternative for mineral oil and pressures up to 15 bar, delivery volumes 17 to 155 liters / minute

or choose a configuration for

hydraulic oil , transmission oil , coolant or Petrol/Diesel

mehr Informationen zu Kühlschmierstoffpumpen

Delivery rate

motor: AC DC 2-pol 4-pol 50 Hz 60 Hz

calculation: cold start operating temperatur

input	value
Drive speed	n= rpm
operating pressure	p= bar
viscosity	v= cSt

Model	Q	P	NPSH
26L	14.33 l/min	0.47 kW	2.37 mWs
30L	16.72 l/min	0.55 kW	2.41 mWs
35L	21.5 l/min	0.7 kW	2.51 mWs
45L	26.28 l/min	0.86 kW	2.61 mWs

  more l/min (GR40)

select the screw pitch and other options that affect the screw design.

Screws without special treatment
HD  phosphated shafts
HA  case-hardened shafts

drive selection

Select the option for the drive from the following table. Depending on the pump size, you can choose between a drive shaft for bellhousing attachment and a hollow shaft (AC) for direct attachment to the standard electric motor. For the shaft version there is the option of mechanical seal TM31Z32 (hydraulic oil), TMZ32Y1 (petrol, diesel) and TMK22U31 (cooling lubricant). With the hollow shaft version, you also select the position of the leakage connection.

option	shafts-ø	shaft length	flange-ø
AC14B5	14 mm	Hollow shaft	160 mm
AC19B5	19 mm	Hollow shaft	200 mm
AC24B14	24 mm	Hollow shaft	140 mm
AC24B5	24 mm	Hollow shaft	200 mm

The pump is clockwise as standard. Upon special request, the pump can also be produced in a counterclockwise version, but this involves considerable additional costs and a longer delivery time. If you need a left-hand rotating pump, please confirm here:Yes, the pump should rotate counterclockwise.

For the version with a hollow shaft, please also select the position of the leakage connection. Standard is D2

The following pictures show from the left: AC (up to GR70), Welle, TM.

casing

choose the housing material and the surface treatment and depending on the pump size possible connection variants.

default material aluminum
G  Gray cast iron housing, drive flange and aluminum suction flange
A  Housing made of chrome-nickel steel, drive flange and suction flange aluminum
KA  Housing made of hardened chrome-nickel steel, drive flange and suction flange aluminum
GD CS  Gray cast iron housing, drive flange and aluminum suction flange, design for coolant

OX  Aluminum parts hard anodised

pressure relief valve

You can get the pumps with an internal pressure relief valve (RF1, RF2, RF3), permanently set to 5, 10 or 15 bar. An externally adjustable pressure relief valve (RP) for pressures of up to 25 bar is also available. The RF version is available with all suction variants, the RP version only with the standard suction flange.

without
RF1  Internal pressure relief valve permanently set to 5 bar
RF2  Internal pressure relief valve permanently set to 10 bar
RF3  Internal pressure relief valve permanently set to 15 bar
RP  externally adjustable to 5-25 bar pressure relief valve

suction

choose axial or radial suction, suction strainer and other options regarding the suction connection.

The standard suction connection can be mounted in 4 positions (no details = T1)

Attention: In the version with externally adjustable DBV, the position cannot be changed afterwards!

The suction connections AX, AL, SMIT cannot be combined with the externally adjustable pressure relief valve.

Seals

The pumps are available with seals made of NBR, Viton, PTFE and EPDM

Our repair kits contain all the required seals, the ball bearing, the feather key and a protective shaft sleeve to avoid costly reworking or replacement of the shaft and to ensure that the shaft sealing ring functions properly.

No repair kit was found for the currently selected pump

Contact

Here you find all important data to contact us.

To contact

Download

Here you find all technical datasheets as PDF-file for download.

To download area

Imprint and Privacy Policy

What else is important?

To Imprint
To data protection
Cookie Settings