Settima Screw pumps
SMT configurator
At the top left (on the smartphone below) you can see the currently selected pump type. Below are the links to the individual pages that guide you step by step through the selection of your pump. If you already know which pump you need, you can configure it very quickly using the other menu items.
Settima-Code
Der Settima-Code für die aktuelle Auslegung lautet: TB35L
Sie finden den Settima-Code (P/N) auf dem Aufkleber der Pumpe. Haben Sie einen Code und möchten unsere Typenbezeichnung ermitteln? Geben Sie hier den Code ein. Sollte keine Übereinstimmung gefunden werden, wenden Sie sich bitte an unser Team.
Selection of the pressure level
SMT 16B |
|
  | |
SMT |
|
  | |
SMT..SN |
|
  | |
SMT 8B | An inexpensive alternative for mineral oil and pressures up to 15 bar, delivery volumes 17 to 155 liters / minute |
or choose a configuration for
hydraulic oil , transmission oil , coolant or Petrol/Dieselmehr Informationen zu Kühlschmierstoffpumpen
Delivery rate
cold start operating temperatur
Model | Q | P | NPSH |
---|---|---|---|
35L | 21.19 l/min | 0.73 kW | 2.39 mWs |
45L | 25.9 l/min | 0.89 kW | 2.49 mWs |
55L | 28.26 l/min | 0.97 kW | 2.54 mWs |
75L | 37.68 l/min | 1.3 kW | 2.76 mWs |
select the screw pitch and other options that affect the screw design.
Screws without special treatment
S1 Special processing of the screws for viscosities 100 to 250 cSt
S2 Special processing of the screws for viscosities 250 to 500 cSt
S3 Special processing of the screws for viscosities 500 to 800 cSt
S4 Special processing of the screws for viscosities over 800 cSt
HD phosphated shafts
HA case-hardened shafts
drive selection
option | shafts-ø | shaft length | flange-ø |
---|---|---|---|
- | 19 mm | 36 mm | 150 mm |
TM31Z32 | 19 mm | 36 mm | 150 mm |
AC19B14 | 19 mm | Hollow shaft | 120 mm |
AC19B5 | 19 mm | Hollow shaft | 200 mm |
AC24B14 | 24 mm | Hollow shaft | 140 mm |
AC24B5 | 24 mm | Hollow shaft | 200 mm |
The pump is clockwise as standard. Upon special request, the pump can also be produced in a counterclockwise version, but this involves considerable additional costs and a longer delivery time. If you need a left-hand rotating pump, please confirm here:Yes, the pump should rotate counterclockwise.
casing
G Gray cast iron housing, drive flange and aluminum suction flange
A Housing made of chrome-nickel steel, drive flange and suction flange aluminum
KA Housing made of hardened chrome-nickel steel, drive flange and suction flange aluminum
GD CS Gray cast iron housing, drive flange and aluminum suction flange, design for coolant
OX Aluminum parts hard anodised
pressure connection: SAE thread
pressure relief valve
You can get the pumps with an internal pressure relief valve (RF1, RF2, RF3), permanently set to 5, 10 or 15 bar. An externally adjustable pressure relief valve (RP) for pressures of up to 25 bar is also available. The RF version is available with all suction variants, the RP version only with the standard suction flange.
without
RF1 Internal pressure relief valve permanently set to 5 bar
RF2 Internal pressure relief valve permanently set to 10 bar
RF3 Internal pressure relief valve permanently set to 15 bar
RP externally adjustable to 5-25 bar pressure relief valve
suction
Seals
currently available from stock: 0